Expert Answers about Keystone Cougar XLite Travel Trailer

• Can I Use the Reese Steadi-Flex # RP66560 with the Curt Shank # C17132 on My Ford F-350's 3" Hitch?
• Yes, the Reese Steadi-Flex Weight Distribution System w/ Sway Control # RP66560 will work with the Curt Weight Distribution Shank # C17132 on your 2020 Ford F-350. However, in order to use the Curt shank, you will need a hitch reduced on your 3-inch hitch in order to fit the 2-1/2 shank into your receiver. For a reducer, I recommend the Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2" # C45408. The installation is easy to use and slides directly into your hitch or onto the Curt shank.
  view full answer...


• Ladder For 2016 Keystone Cougar XLite Travel Trailer
• Stromberg Carlson has a RV Exterior Ladder! It just depends on what color you want. We carry a 99-1/2" x 12" # LA-401 or the black version # LA-401BA. If you didn't need that long of a ladder, you could get the Surco Universal Exterior RV Ladder which is 84-1/2 inches Long # SP502L. I've included a review video of the Stromberg Ladder so check that out!
  view full answer...


• Will the Lippert Electric Trailer Braking Assemblies Work With a 4,400 lb AL-KO Axle
• Yes, the Lippert Electric Trailer Brake Assembly # LC96WD will work with your 4,400 lb AL-KO axle. This braking assembly will replace your left side brakes, has a 4 bolt mounting flange, and measures 10" diameter x 2-1/4" wide.
  view full answer...


• Will The Lippert SolidStep # LC791572 Fit A 24" Door Width
• I went out to the warehouse and measured the SolidStep Manual Fold-Down RV Steps # LC791572 and found the mounting bracket to be 21" in width and the actual body of the steps to be approximately 22-5/8" in width so you should have no problem installing these steps in your 24" opening. You will most likely need to adjust the brackets that close up to the door threshold and hold it in the upright position. I've attached a short video below to help walk you through the installation process.
  view full answer...


• How To Reseal RV Window Trim
• To reseal the window trim you'll want to first clean off the old sealant with some composite tools # PT73HJ (to prevent scratches to the trailer wall). Once the old sealant is removed you can clean the surface with some rubbing alcohol and then apply some non-sag sealant # 344270341437-1.
  view full answer...